H2/A2L Size Moon Lamp LED Kit 001

This is an H2/A2L size extra large moon lamp with a beautiful wavy base. Its designed to take full advantage of 320mm build plate. Two versions available one uses the Bambu LED Kit 001 light, and a second one uses a GU10 bulb for a brighter moon. First photo shows the much larger size in comparison to a standard size moon lamp. 

The LED Kit 001 version works with both Bambu and aftermarket kits that have the larger power switch and RGB multi-color light. The GU10 base is to be printed without supports, there is a sacrificial layer you need to break through after printing. The wavy base has PETG support interface layer, if you dont have an AMS please make sure to use the "no AMS" profiles as they have different top z support distance. The bulb base is a bit loose locking into the moon but you can add a drop of glue if you move the lamp frequently. 

Aliexpress multi-color LED kit: https://a.aliexpress.com/_mMO8cGd 

Bill of materials for GU10 Version:

1. GU10 Sockets: https://www.amazon.com/DiCUNO-Resistant-Maximum-Connector-Packages/dp/B07GVB2P2N/
2. LED bulb: https://www.amazon.com/Euri-Lighting-EP16-7W5020eG-2-Dimmable-Equiv/dp/B09PB1CG3L/ 

3. Lamp cord: https://www.amazon.com/RTNLIT-Button-Polarized-Stripped-Replacement/dp/B0C7BZ65S2/ 

    

Click here to check out my original bright moon lamp for 256mm size printers (A1/P1/P2/X1/X2).