Charizard Hueforge - Pokemon

MembershipBoost Me

Projet: Dragofeu.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 189.89x235mm in size
You may print at higher layer heights below the Base Thickness of 1.28mm
The Max allowed Thickness is 3.44mm and the Actual Thickness is 3.44mm

 

Filaments utilisés: 
    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Matte Ice Blue  Transmission Distance: 3.5
    PLA BambuLab Basic Red  Transmission Distance: 4
    PLA BambuLab Basic Yellow  Transmission Distance: 5.5
    PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 5 unique filaments

 

Instructions de changements:
    Commencer par Black
    At layer #19 (1.6mm) swap to Ice Blue
    At layer #21 (1.76mm) swap to Black
    At layer #22 (1.84mm) swap to Red
    At layer #27 (2.24mm) swap to Yellow
    At layer #29 (2.4mm) swap to Jade White
    At layer #31 (2.56mm) swap to Yellow
    At layer #32 (2.64mm) swap to Ice Blue
    At layer #35 (2.88mm) swap to Jade White pour le reste.

 

Comment imprimer plus de 4 couleurs avec un seul AMS : à partir de 42 sec sur la vidéo

How to print more than 4 colours with a single AMS : from 42 sec onwards in the video