Seatberry - A TPU cushion

A Little Announcement (Here for a Short Time):

My crowdfunding project Brick berry+ has officially entered the pre-launch phase on Makerworld! You can check it out and follow along here:
https://makerworld.com/zh/crowdfunding/43-brick-berry-a-playable-footwear

There will be a special surprise for followers of this channel when the project goes live—stay tuned!

Introduction

This is a 3D printed office chair cushion designed based on the FDM TPU printing process, which can provide better support and comfort for long hours of office work. The cushion is made of TPU 90A or 85A, which has excellent elasticity, evenly disperses pressure and relieves back pain caused by prolonged sitting. the combination of crosszag and helix padding not only increases breathability and prevents smothering, but also makes it easy to clean and air dry. The overall appearance of simple and modern, compatible with a variety of chair types, is the ideal choice for office, home office and learning environment, so that every time you sit for a long time more healthy and comfortable.

Usage Scenarios

🪑💺Application Scenario: office chairs, car seats or other chairs

🧼💦Cleaning and Maintenance: machine washable, dryable (not exceeding 80 ℃)

Sizing Guide

There is no special size requirements for this product, adults and children can use the same, if necessary, you can scale the model, or in the comment area / private message to send size fit suggestions

Recommended Filament & Printing Tips

Recommended Materials:

- Bambulab TPU 90A (0.4mm nozzle recommended) for a finer surface and silkier feel.

- Bambulab TPU 85A (0.6mm nozzle recommended) for a softer touch

Please refer to the wiki before printing, both materials have excellent breathability, flexibility and support. The model does not require additional support and is scaled to the appropriate print size to fit all bambulab models (the uploaded profile is only for the H2D heat bed size, scaling is required for all other models)

Note: The uploaded print profile is for the H2D as only the H2D has a large enough heat bed to print the entire cushion in one go, and of course, the H2D has a large enough heat bed to print the entire cushion in one go, but the H2D has a large enough heat bed to print the entire cushion in one go. Of course, if you have a slicing solution for the X/P/A models (e.g. reducing the size of the cushion to fit a specific group of people), feel free to post pictures of the results and upload a print profile, and I'll set up a sharing credit for a well-tested print profile.