Hanboost C1 Ultrasonic Cutter Blade Cap

A blade cap for the Hanboost C1 Ultrasonic Cutter that allows it to fit in the storage case with the cap on.  The cap has a grip for easier removal from the storage case.

The C1 came with a longer cap that could not be used with the case.  I found it a little difficult to lift the cutter out of the case, so I added a grip on the cap.  After a few iterations, this model is what I came up with.  The base of the cap is a little wider than the foam gap, but the soft foam allows it to fit easily.  I used a brim during early test prints, but printed this final one with a slower first layer and the brim turned off, and it printed fine for me.  You can turn the brim back on if desired or if you have any bed adhesion issues.