Filament Rack Labels

This is a two part filament tag system originally designed for my Filament Rack but can be used for any round stick.  It is made out of two parts; one is the main body you attach to the pipe and another is a cover which can be removed when you move the filament roll or change its location.  It was made so you don't have to unclip the main body and just take the label itself. 

Each tag is only 15 grams of filament and you have roughly 2 by 1 inch area to work with; this is almost as wide as standard filament spool.

There are two print profiles, first one is for use with Label Maker and 2nd one has most of filament types pre-printed so you don't need Label Maker, let me know if I missed any labels on the 2nd one and I'll add them.

Labels in photos were made on Brother PT-P710BT.

Edit 4/18/26: Made the model customizable, you can change the holes from 13-30mm size which should cover pretty much anything you want to use.  Make sure to make the hole slightly smaller than your pipe / stick for better grip, around 1mm smaller should work.  

Note: Customization doesn't change the cover sizes, you can use printed covers with customized body if you want.