Atom Eve

This is atom eve (Samantha Eve Wilkins) from invincible. this is based off a page from the comic book. the artist is Ryan Ottley.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #f5547c PLA BambuLab Basic Hot Pink  Transmission Distance: 3.9
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Hot Pink
    At layer #17 (1.44mm) swap to White for the rest.
 

Those are just the filaments i had on hand. use whatever you want.

To scale it, change the x and y dimensions, do not change the z dimension.

Boost Meboost me if you like my prints