BBL 4-in-1 PTFE Adapter Mount P1S/X1C

The newer Bambu Lab P1S and X1C printers come with a 4-in-1 PTFE adapter but no proper mount for it. This creates awkward angles that bend the PTFE tubes and can cause feeding issues and clogs.

I designed this angled mount specifically for these printers to solve that problem. It positions the adapter at the correct angle to keep your PTFE tubes in their natural curve without stress. The mount sits flush with both the printer and adapter, creating a clean integrated look.

Boost MeLove this design? A quick boost helps other makers discover it and motivates me to keep creating useful prints for the community. Thanks for the support!

[Technical Specifications]

Parameter	Value
Layer height	0.2mm
Material	PLA, PETG
Supports	None required
Nozzle	0.4mm recommended
Hardware needed	2x M3×6-10mm socket head screws, 1x M3×12mm socket head screw
Hole dimensions	3.3mm (printer mounting), 3mm (adapter mounting)

[Installation]

Mount using the existing screw points on your printer. The angled design automatically positions your PTFE tubes at the optimal angle for reliable operation.