Poker Blinds (ONLY 10g)

V2 is now out! https://makerworld.com/en/models/1620826-poker-blinds-v2-only-10g-now-with-ams-options#profileId-1710885

these are a very good option if you wish to save filament and i would recommend doing them in different colors as it will look nicer.

these have a 57mm diameter and a 7.41mm depth/height.

this is also partially inspired by @PALPRINTS  so if you want chips to match with the similar hexagon pattern then i would recommend going to his page and printing the (Poker Chip Airless.) model