Charizart Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.88mm

Filaments Used:
    #000000 PLA BambuLab Matte Charcoal  Transmission Distance: 0.6
    #cd007b PLA BambuLab Basic Magenta  Transmission Distance: 3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #fce300 PLA BambuLab Basic Yellow  Transmission Distance: 6
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 2.4
This print uses 6 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #6 (0.56mm) swap to Magenta
    At layer #9 (0.8mm) swap to Jade White
    At layer #11 (0.96mm) swap to Pumpkin Orange
    At layer #20 (1.68mm) swap to Yellow
    At layer #24 (2mm) swap to Jade White
    At layer #33 (2.72mm) swap to Turquoise for the rest.