H1 - Case for Heltec V3 running Meshtastic

[28 Jun 2024] – Update to V1.2
Change log:
- Case Front has more room for the OLED screen and better alignment
- Case Rear is updated to the new logo
- Buttons are drafted for better fit

The original case design that started it all for the Helte V3 Lora board. Recommended to print in a Matte filament to provide more grip.

Install the buttons, board, SMA Pigtail and snap the 2 halves of the case together.

Tap the M3x0.5 post on the ‘Case Rear’, careful not to poke through the wall at the end.

Secure with a M3x12mm screw for a rock solid enclosure.

No time to print? Purchase the Complete Device or Case only from my web store:

https://muzi.works

Fits:
- Battery up to 8mm x 30mm x 48mm (Extended version: 10mm x 30mm x 48mm)
- SMA Pigtail
- Your choice of SMA antenna up to 10mm in diameter at the base

Recommended components (complete kit):
https://muzi.works/products/heltec-kit

Recommended battery:
https://muzi.works/products/h1-battery

Dimensions:
- 45.5mm x 64.6mm x 19.5mm [1.79in x 2.54in x 0.77in]
- 22g [0.78oz]

Meshtastic® is a registered trademark of Meshtastic LLC. Meshtastic software components are released under various licenses, see GitHub for details. No warranty is provided - use at your own risk.