Oga's Cantina - 4 Star Wars Galaxy's Edge Coasters

Embark on a journey to a galaxy far, far away with this coaster inspired by those available from Oga's Cantina on Batuu Star Wars: Galaxy's Edge – the perfect companion for your favorite drinks! Whether you lean towards the light or embrace the dark side.

Overview

This set of four coasters is inspired by the limited edition designs, which are no longer available from Oga's Cantina on Batuu in Star Wars: Galaxy's Edge at either Disney World or Disneyland California. This set of four can be printed alongside a core set of 6, and complemented by the coaster display stand. Both other models are available in my profile.

Parts count: 6

Key Features

• Inspired by the iconic Oga's Cantina at Star Wars Galaxy's Edge.
• Dimensions: 100mm in diameter, 4mm thick.
• 4 color prints.
• Pre-sliced.
• Tuned print profiles.
• Provision to add no-slip feet to the back.

Printing Details

Recommended filaments:
- eSun PLA+ Cold White
- eSun PLA+ Black
- eSun PLA+ Bone White
- eSun PLA+ Fire Engine Red

Hotend: 0.4mm Hardened Steel

Print time: Each coaster typically prints in about 45-75 minutes

Printing Tips:

• Most coasters share the same four colors: White, Black, Dark Red/Maroon, and Tan.
• The Cantina Code coaster uses Light and Dark Purple, as well as Tan.
• The Star Liner coaster uses Grey and White.
• Printing with an AMS is necessary for optimal results.
• The print profiles automatically assign colors to the coasters. Before printing, ensure that you've placed your filament in the corresponding slots of the AMS according to the 3MF file.
• Ensure your print surface is impeccably clean before printing a coaster, especially for those with predominantly dark colors on the face. Otherwise, any dirt, residue, or filament wisps may become embedded in the print. Consequently, I do not recommend using glue.

Assembly

Added to the files is a jig which helps with even placement of non-slip Silicone Pads (6 x 2mm). Which can be purchased on Amazon

May your libations be as legendary as the tales told in the Outer Rim. May the Force be with you!