Kaiju no. 8 Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Ash Gray
    At layer #11 (0.96mm) swap to Turquoise
    At layer #16 (1.36mm) swap to Jade White for the rest.