BB Air Engine For Building Blocks

This model is designed to work with ‘building brick’ parts, turning a standard engine cylinder into a working air-powered engine. 

Once printed, you'll need to take these steps to get the engine working:

• Remove support material
• File/sand the parts of the valve housing and sealing cap that will touch each other to get rid of any excess support material. 
• Check that the piston head travels smoothly into the cylinder. If there's any friction, gently sand the piston head.
• Insert the o-rings around the piston head (9mm), sealing cap (14mm), and into the bottom of the valve housing (8 mm) (3 o-rings total)
• Drill 2 exhaust ports into the ‘building brick’ engine cylinder, just below where the piston's o-ring travels at the bottom of the stroke
• Superglue the valve housing to the top of the engine cylinder
• Insert an airsoft 6mm ball bearing into the valve housing
• Use two M3 bolts to secure the sealing cap to the valve housing
• Connect some 2mm (inner diameter) pneumatic hosing from the valve to an air supply
• Assemble the ‘building brick’ engine using parts to fit your needs (you can use my YouTube video as reference)
• Lubricate the piston head for smooth operation