Mitsubishi Pajero – Hueforge – 3 Colors

Show off the spirit of off-road adventure with this Hueforge 3D print of the legendary Mitsubishi Pajero, rendered in 3 crisp and balanced colors.
Perfect for fans of 4x4 vehicles, rally enthusiasts, or collectors of classic automotive designs, this piece adds rugged energy to any space.

You can find my other models of the same type on my profile.

https://makerworld.com/en/@3dkmaker

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.92mm and the Actual Thickness is 1.92mm

Filaments Used:
    PLA PolyLite Black  Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Blue Gray
    At layer #16 (1.36mm) swap to Jade White for the rest.