July 22, 2025
Description
Original artwork - Collection Cyberpunk travel Poster
https://makerworld.com/fr/collections/8229350-cyberpunk-travel-poster
Hueforge of Kyoto cyberpunk travel poster
The photos shows the result in 150x200mm and a nozzle of 0.4
You can change the X and Y dimensions but do not change the Z dimensions
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
You can use filaments other than those indicated, but the result will differ.
You can use any black PLA
Hueforge description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 150x200mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 3.8mm and the Actual Thickness is 3.72mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#cd007b PLA BambuLab Basic Magenta Transmission Distance: 3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #18 (0.84mm) swap to Blue
At layer #28 (1.24mm) swap to Jade White
At layer #38 (1.64mm) swap to Magenta
At layer #52 (2.2mm) swap to Black
At layer #53 (2.24mm) swap to Red
At layer #63 (2.64mm) swap to Yellow
At layer #78 (3.24mm) swap to Jade White for the rest.
No additional copyright, this is my original work
License:
Standard Digital File License
Altf4-Formation
