M.2 NVME mSATA 2280 SSD drive storage box holds 10

Boost MeBoosts are always appreciated and welcome. Thank you!

I made a hinged box to fit ten (10) M.2 2280 NMVe and mSATA drives. Slots are wide enough to accommodate drives with chips on both sides. 

You can use any filamanet but it is suggest you use either PLA-CF or PETG-CF as they are anti-static. But, you can use regular filaments if you want also.

 

The hinges are print in place and no supports are needed. The first time you close the box it might take a little effort but after that it opens and closes easily.

 

Happy printing.