July 22, 2025
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA Bambu Bone White (Manual Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Red
At layer #16 (1.36mm) swap to Bone White (Manual
Border Only Colors from here until the end.
At layer #21 (1.76mm) swap to Ivory White for the rest.
License:
Standard Digital File License
Estiv
