Mira Woldo from KPop Demon Hunters

So sorry for the wait everyone, this one took a lot longer than I was expecting it to.

I love Huntr/x, and they're my new favorite K-pop band. I added a photo of a cross-section of the whole assembled glaive so hopefully that'll make sure everyone knows how to put it together. I had a few people have issue with tolerances on the pins of Rumi's sword with .25mm of clearance so I increased these to .4mm to hopefully fit a bit easier. The full length is roughly 182cm (72 inches) so it's quite large.  Sorry for the rough photos, had to use a .5 zoom the get the whole thing in frame. Added a photo with a 24 inch by 16 inch flag for scale.

I added a 70% scale version with a 1cm hole that runs 0.8 meters through the whole handle. That's ~3/8" diameter in freedom units and ~29" long. Everything else is the same, just smaller. 

I added a full scale version that just uses pieces that can be printed so no wooden dowel is needed if someone doesn't have access to one

Important:

I added a hole through the handle for either a ½ inch (1.27cm) or 5/4 cm (.49 inch) diameter by 1 yard or 1 meter (preferred) long wooden rod. The diameter internally is 1.325cm, but I wanted to try to account for any inconsistencies in the wood so if a different sized rod fits tighter then that'll be better structurally.

If you'd like to see anything else or have any issues with the model, comment or DM and I'll do my best to get back to you.

Also, to be in the exclusive model program I had to change the license from Creative Commons (4.0 International License) to Standard Digital File, but if anyone needs that changed for whatever reason just DM and I'll figure that out.