July 23, 2025
Description
Don't have time to run to the hardware store? How about a 6.5 hour print instead? 😂
This is a 4inch Y pipe connector designed to join two 4" dryer hose pipes into one! 98mm OD. Print with Fuzzy Skin for extra hose grip! Route your printer fumes outside your home!
Stick the inline fan on the single outlet to supplement pulling fumes from your printers or enclosures fans.
0.2mm layer, 2 walls, 15% infill, orient vertically (w/ 90deg sweep to the side), support under overhangs w/ Painted Tree Manual supports or Auto Tree supports (Tree Slim style)
NOTE: This is from the Post (after) BBL calamity - if your slicer/firmware has not been updated to latest this WILL NOT pull the right settings in, unless BBL sorts that issue out.
Print Profile from A1 Mini
Print with fuzzy skin for added grip when tightening vent
NOTE: I have only printed the 3inch version but this should print the same (only more time/filament)
Link for an Inline fan thru my amazon affiliate link. Anything you buy whether it's this fan or some other thing you need will help support my work for 3D models. I use this to extract fumes and send them directly outside my home.
License:
Standard Digital File License
FleeeinIan3D
