Ozzy Osbourne Hueforge

Ozzy Osbourne Hueforge

Prince of Darkness Rest in Peace

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Beige
WARNING: This Slider is at the same Layer as the Next Slider
 At layer #19 (1.6mm) swap to Jade White for the rest.

Boost MeHelp me improve making better things for the Community :)