July 24, 2025
Description
Hueforge of Scream 4
The photos shows the result in 135.07x200mm and a nozzle of 0.4
You can change the X and Y dimensions but do not change the Z dimensions
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
You can use filaments other than those indicated, but the result will differ.
You can use any black PLA
Hueforge description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 135.07x200mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 1.92mm
Filaments Used:
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Red
At layer #22 (1mm) swap to Black
At layer #25 (1.12mm) swap to Blue Gray
At layer #33 (1.44mm) swap to Jade White for the rest.
License:
Standard Digital File License
Altf4-Formation
