Jujitsu Kaisen - Sakuna

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 146.64x230mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 2.3mm and the Actual Depth is 2.4mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Polymaker Starlight Mars Transmission Distance: 2.4
    PLA PolyLite Starlight Jupiter Transmission Distance: 1.5
    PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
    PLA Bambu Basic Gold Transmission Distance: 2.8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #23 (1.12mm) swap to Starlight Mars
    At layer #32 (1.48mm) swap to Starlight Jupiter
    At layer #35 (1.6mm) swap to Savannah Yellow
    At layer #36 (1.64mm) swap to Gold
    At layer #46 (2.04mm) swap to Jade White for the rest.