Frieren - Stuck in a Mimic

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 195.55x230mm in size
You may print at higher layer heights below the Min Depth of 1.4mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA HueForge Dark Gray 2.3 Transmission Distance: 3
    PLA BambuLab Basic Silver Transmission Distance: 0.5
    PLA PolyLite Pro Cold White Transmission Distance: 0.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #32 (1.48mm) swap to Dark Gray 2.3
    At layer #40 (1.8mm) swap to Silver
    At layer #43 (1.92mm) swap to Cold White for the rest.