Demon Slayer - Inosuke

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 131.29x230mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 2.6
    PLA Bambu Basic Bronze Transmission Distance: 0.7
    PLA Bambu Metal Copper Brown Transmission Distance: 0.5
    PLA Bambu Metal Iridium Gold Transmission Distance: 1
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA PolyLite Pro Cold White Transmission Distance: 0.5
This print uses 7 unique filaments

Swap Instructions:
    Start with Black
    At layer #24 (1.16mm) swap to Blue Gray
    At layer #25 (1.2mm) swap to Bronze
    At layer #29 (1.36mm) swap to Copper Brown
    At layer #33 (1.52mm) swap to Iridium Gold
    At layer #43 (1.92mm) swap to Jade White
    At layer #47 (2.08mm) swap to Cold White for the rest.