Simple Filament Rack for 1 Inch Wood Dowels

For US makers, you can build this with 1 inch dowels cut to length. Print 4 of each part and assemble. 

Depending on dowel tolerances, you may need to sand the ends a bit to fit. Consider also adjusting X-Y hole compensation to make the holes a bit larger in diameter.

Bottom corners have feet, but these are not necessary. You could just print 8 top corners.

Recommended cut lengths: 10 in for vertical dowels, 3.5 inches for depth dowels, and 24+ in for width. Make as long as you want. Each hole is 1 inch deep, so account for that.

Print materials and settings are totally flexible. I don't think this needs more than like 5-10% infill but I would suggest slightly thicker walls.