Batman Door Stop and Logo Display

Do you have too much SMASH! BANG! BLAM! from a door that won't stay open? Or maybe your Batman display shelf has too much empty space?

Look no further - the perfect solution is right here - the Batman Door Stop and Logo Display!

Whether your favourite Batman is from 1966 or 1989, you can choose to display the logo either as a door stop or on a simple stand.

The door stop base and simple stand are the same for both logos.

Designed to be printed without AMS and as few supports as possible. The custom supports that are used, can be fairly easily removed using long nose pliers.

The parts can be a tight fit - particularly the door stop base and stand - but some filing or sanding of edges and surfaces that are not visible after assembly will resolve this issue. While the bat symbol can also be a tight fit, it can be pushed into place without any post-processing.

IMPORTANT!

These are mostly designed to be decorative rather than fully functional. As such, the print profiles are with 2 walls and 15% infill to keep print times lower. However, if you want a more sturdy model, then increase the number of wall loops and/or infill percentage.

The door step wedge would also benefit from being printed in e.g. TPU.

Assembly steps for the door stop:

Assembly steps for the logo display: