Numbered Rings for 32mm Miniatures

I really enjoyed Vault 3D Design's tracker rings but most of my minis were 32mm, which were a smidge too big, so I made this remix to fit! Many war gaming systems like 40k have 32mm bases for the most common and numerous units. These markers can fit both those and the smaller 25mm/1 inch minis, covering the vast majority of minis with the same ring (without being too large that it becomes unwieldy). 

 

There are also 2 print profiles: one for the larger bed sizes (A1 / P series / X series) and another for the smaller bed size of the A1 Mini.

 

AMS is not required. If you'd like to print in multi-color but don't have AMS, set an automatic pause:

1. Open the Print Profile in Bambu Studio (computer application). 
2. Click Preview. 
3. Find the layer where the numbers start to get printed.  

4. On the right side, there is a vertical green line. Right-click on the layer > Add Pause.

5. Start your print.
6. When it pauses automatically, use the Unload function on the printer menu. 
7. Take the original filament off the spool holder, and add the new filament. 
8. Using the Load function on the printer menu, you’ve now switched the filament. 
9. After you’re done, I also recommend setting the printer speed to “Silent” (50% speed) during the first few layers with the new color (speed options are found in the printer’s menu).
10. When ready, click Resume printing.

Boost MeIf you like this model, please boost it. Thank you!