July 27, 2025
Description
IMPORTANT NOTE: Make sure you put the correct lid lock on the correct side. It does matter which side goes on which. The lid lock printed on the left goes on the left side of the AMS, and the lid lock printed on the right goes on the right side of the AMS. Also, please watch the instructional video to install it below. It is easy, but you want to make sure that it snaps on.
The "QuickFlip" Lid Lock is a tool-free, snap-in upgrade designed specifically for the Bambu Lab AMS 2 Pro, and is also compatible with the original AMS.
This print makes it faster and easier than ever to lock and unlock your AMS lid. It is very satisfying to swivel the locks open and closed quickly. With its clear visual indication of locked vs. unlocked, you’ll avoid pulling on a locked lid and potentially damaging your AMS.
Make your AMS experience smoother and smarter with this clean, functional upgrade.
P.S. You can blame the wife for the Turtle Halves. I showed her my initial prototype and she told me it looked like a turtle head…😅
DON'T FORGET TO SHARE PICTURES AND RATE! I LOVE SEEING ALL THE DIFFERENT COLOR COMBOS!
Note: There is a left lid lock (On left side of bed) and right lid lock (On right side of bed). Watch the video below to learn how to install or uninstall the locks.
Installation:
PLEASE WATCH!! The lid locks should “LOCK IN” and will not fall off once locked in.
Revision Log:
9/18/2025 - Logo updated so that it is no longer upside down!
11/19/2025 - Increased the mesh count of the single color model to give a smoother surface finish
License:
Standard Digital File License
3
Paul Prints 3D
