FakeTec Case - Testosterone Edition

FakeTec PCB Case

Testosterone Edition

Introduction

This project is a portable case designed for the FakeTec PCB. It includes a 1.3-inch or 0.96-inch OLED display, GPS module, BME280 sensor, and on/off switch. The power comes from a 3.7V 2000 mAh LiPo battery. The case is compact, easy to assemble, and ideal for outdoor or mobile use. You can find all STL files, part links, and technical details below. There are four case versions you can choose depending on your needs. All models are uploaded in the highest resolution, sharp enough to be worth resin printing. (Have you ever seen STL files this large before? 😄)

Model	Code	Display	Button	BME280	Description
1	D1B1S1	✅ Yes	✅ Yes	✅ Yes	Full version with all components
2	D1B1S0	✅ Yes	✅ Yes	❌ No	With display and button, but no BME280
3	D0B0S1	❌ No	❌ No	✅ Yes	Includes only BME280, no screen or button
4	D0B0S0	❌ No	❌ No	❌ No	Minimal setup: no screen, no button, no BME280

STL files for each version are included separately.

Required Parts

Screws

Why BME280?

The BME280 sensor is a reliable and widely used module that provides temperature, humidity, and pressure data in one compact package. It's perfect for indoor air monitoring and environmental sensing. There are two popular versions on the market — one with 3.3V logic and another with a 5V regulator. This model is designed specifically for the 3.3V version, so please make sure to use the correct module.

 You can read this article for a comparison with other sensors:
🔗 Sensor Comparison – RandomNerdTutorials

Conclusion

This FakeTec-compatible case is great for projects that need protection and portability. It is easy to print and assemble. You can choose the full version with screen and sensor or a basic one. Everything is tested and ready to use.