DPS5005 Minimalist case

This is my interpretation of what a DPS5005 case should look like. I wanted a smaller case than was typically available. Although you need to print this with supports, they are very easily removed. Print the models the way they are orientated. It's the fastest, and cleanest way to print them.

Parts List:

1 x DPS5005 (can find on Amazon or eBay or elsewhere)

1 x DC Barrel Jack: https://smile.amazon.com/gp/product/B06XRT5C2Q/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

1 x SPST Rocker Power Switch https://smile.amazon.com/gp/product/B00B88E5EU/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

2 x Binding Posts / Banana plugs https://smile.amazon.com/gp/product/B00UHFF2ME/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

4 x screws (the holes are 3mm. I used small wood screws but I'm sure better options exist)

4 x rubber feet (10mm diameter or smaller)

You'll also need some 16 gauge hookup wire. Terminal connectors are optional if you want to minimize soldering.

You can also use your own choice of parts. These are what I used and fit the PS case.

Please post your comments and makes!

Print Settings

Printer:

Hatchbox Alpha

Rafts:

Supports:

Yes

Resolution:

Infill:

20%

Notes: