Monitor Riser – 5” Lift | Modular & Customizable

Boost MeHelp Me Buy A P1S

 

Upgrade your workspace with this stylish, ergonomic, and fully customizable monitor stand. Designed for an 8 3/8″ (212.7 mm) wide shelf and delivering a 5-inch (127 mm) lift, this stand enhances posture, clears desk space, and brings a unique topographic flair to your setup.

 

Customizable side panels and drawer fronts with topographic designs you can remix, recolor, or even paint. Built for makers who want both functionality and style.

 

 

🔧 Features:

• 5-inch lift – Raises your monitor to a more ergonomic height, reducing neck strain.
• Shelf-ready fit – Made to sit flush on an 8 3/8″ shelf or similarly sized surface.
• Customizable topographic panels – Side covers and drawer fronts feature swappable designs for easy personalization.
• Two front drawers – Handy storage for USBs, SD cards, adapters, or even your secret snacks.
• Under-stand space – Tidy up your workspace by sliding your keyboard or accessories underneath.
• Modular build – Combines a flat wood or MDF top with 3D printed components.
• Clean, modern look – A mix of sharp lines and organic patterns for a functional but artistic finish.

 

🖨️ Print Settings:

• Nozzle: 0.4 mm (0.6 mm compatible for faster prints)
• Layer height: 0.2–0.28 mm
• Infill: 15–20%
• Material: PLA or PETG recommended. TPU optional for non-slip feet.

• Supports: ✅ Required for the risors

   

🧩 Parts List:

• Left & right leg 
• Side panels with topographic design (customizable)
• Two front drawers with customizable faces
• Optional TPU feet or rubber pads

• Top surface (wood or MDF, user-supplied)  

  https://www.homedepot.com/p/Dolle-LITE-23-6-in-x-9-8-in-x-0-75-in-Espresso-MDF-Decorative-Wall-Shelf-without-Brackets-55176/203485087

• 8Ea  # 8 Wood or sheet metal scews flat head

  https://www.homedepot.com/p/Everbilt-8-x-1-in-Zinc-Plated-Phillips-Flat-Head-Wood-Screw-100-Pack-801822/204275495?MERCH=REC-_-plpsearch_multi-_-204275494-_-0-_-n/a-_-n/a-_-n/a-_-n/a-_-n/a

• M3 Flat Head Scews

🛠️ Installation Instructions:

1. Position the risers – Center each riser on the edge of the shelf (one on the left, one on the right).
2. Align carefully – Make sure both risers are flush and symmetrical before securing.
3. Secure in place – Use screws to fasten each riser to the underside of the shelf. Pre-drill if needed to avoid splitting.
4. Insert drawers & panels – Slide the drawers into place and screw m3 flat head  the topographic panels for final flair.

 

 

🛠️ Customization:

different drawer patterns, or something more "you"? Drop a comment! I'm happy to help you remix panels or adapt the design to your workspace needs.

 

 

Check out my Adjustable Studio Monitor Stand 5.9″ Lift”

 

https://makerworld.com/en/models/1568466-adjustable-studio-monitor-stand-5-9-lift#profileId-1649148