Minimalist Screen Bezel for Bambu Lab P1P / P1S

These are two simple bezels for the Bambu Lab P1P / P1S screen. Choose what you prefer.
They will be pressed on the screen from the front and clip to the screen on the backside. Yes, it is a tight fit - if it is too tight for you then you can scale the model with the slicer in z-direction by +0.1 or +0.2% and print again.

Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0
You are not allowed to copy this model to other 3D printing websites without my permission.