Fall out boy cork tree

Project: Fall out boy cork tree.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 230x226.94mm in size
You may print at higher layer heights below the Base Thickness of 0.6mm
The Max allowed Thickness is 2.68mm and the Actual Thickness is 1.96mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #e70e19 PLA Polylite Pro Red  Transmission Distance: 4.2
    #55331a PLA PolyLite Brown  Transmission Distance: 0.8
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 6.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 2.1
    #ffd91c PLA PolyLite Pro Metallic Gold  Transmission Distance: 2
This print uses 6 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #12 (0.64mm) swap to Polylite Pro Red
    At layer #20 (0.96mm) swap to PolyLite Black
    At layer #21 (1mm) swap to PolyLite Brown
    At layer #22 (1.04mm) swap to BambuLab Basic Jade White
    At layer #24 (1.12mm) swap to BambuLab Basic Blue Gray
    At layer #28 (1.28mm) swap to BambuLab Basic Jade White
    At layer #44 (1.92mm) swap to PolyLite Pro Metallic Gold for the rest.