Samurai with red moon - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 113.33x170mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.92mm and the Actual Thickness is 1.84mm

Filaments Used:
    #ffffff PLA HIGH SPEED 3DPower Pure White  Transmission Distance: 2.3
    #c4c4c4 PLA HIGH SPEED 3DPower Telegrey  Transmission Distance: 3.1
    #392412 PLA 3DPower Brown  Transmission Distance: 0.2
    #000000 PLA+ HIGH SPEED Jamg He Black  Transmission Distance: 0.3
    #e62a1c PLA HIGH SPEED 3DPower Flame Red  Transmission Distance: 3.3
This print uses 5 unique filaments

Swap Instructions:
    Start with Pure White
    At layer #8 (0.72mm) swap to Telegrey
    At layer #16 (1.36mm) swap to Brown
    At layer #18 (1.52mm) swap to Black
    At layer #19 (1.6mm) swap to Flame Red for the rest.