July 30, 2025
Description
Replacement part for the heater pipe clamp located under the airbox. Used as a noise reducer, the OE part is made of rubber; mine was broken so I had to design it myself.
Easy install, remove the airbox and simply clip it on the two screws.
Installed on my E46 and tested in real conditions for about 3,000km - it works the same as the original part. Lighter than OEM.
Print with regular TPU 95A at maximum 15% infill so it stays soft, as 95A TPU can be hard when printed at higher infill percentages.
Designed by axwasser
License:
BY-ND
axwasser
