This is a wall mount for your Quest 3 including the controllers.
Version 1.1 differs as follows:
- bigger opening to not obstruct the proximity sensor (no longer sometimes preventing sleep of your Quest 3), especially with white filament
- got rid of the top screw hole (although this one makes the most sense I wanted to hide them as good as possible)
- to counter that I have implemented both invisible and more or less visible structures, so the print wont sag long-term (still depends on your print settings and/or filament, if or how likely this might happen)
- both lower screw holes are at the same spot (so feel free to update from V1 to V1.1)
- lower screw holes behind the controllers, so they are hidden by default, the screw caps still need a little dab of glue
- rounded off the controller supports
- moved the controller up a bit
Default print profile is with plenty of infill and 3 walls. The reason? I don't want this to sag long-term and the additional 10.000 mAh on my headstrap is adding quite some additional weight.
I'll add a faster, lighter print profile as well (please see available ones).
Happy VR gaming (and hassle-free storing) everyone!
SmashD
