American Flag Air Force light switch, AMS unneeded

This should fit a standard light switch.  It is an american flag top with an air force logo on place of the stars.  It is 2 ¾ in wide, 4 ½ in long and 0.296 in tall with a 1/8 in dent in the back.  It is also printable without an ams.  if you don't have and AMS you will have to pay attention to which layer it is on. if you have a 0.4 nozle you will need to pause the print, go to the filiment and unload it, and switch the color from blue to white on layer 19, on 35 you will need to do the same and switch the color from white to red the same way you did before. (you will not be able to change the filiment settings).  you also will have to use your own screws that should already be in your light switch cover. Just unscrew the skrews, take of the former cover, put on the new one, and screw them back in.

I hope you enjoy and please leave a comet and let me know what you think

Enjoy