Final Fantasy VIII (8) Logo Poster

Boost MeBoosts help me to make more designs like this.  If you enjoy this poster, please consider giving me a comment, like, or boost! :)

“Right and wrong are not what separate us and our enemies. It’s our different standpoints, our perspectives that separate us.”
— Squall Leonhart

 

This is the logo art from Final Fantasy VIII turned into a poster print.

 

For a lot of fans, this one was different. It leaned into emotional storytelling, big themes like memory and identity, and had a soundtrack that still holds up today. This artwork brings it all back—the tension between characters, the elegance of Edea, and the feeling of stepping into something deeper than just a fight to save the world.

 

A perfect piece for anyone who still hears “Eyes On Me” and remembers what this game meant.

 

-----

 

Hueforges can be resized by adjusting only the X and Y scale—leave the Z height unchanged for best results.
 
Each print is 132.98x200mm.

These prints display wonderfully with a 3d printed HueForge stand, such as the middle size shown here (as shown in the print photos):
https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc?from=search#profileId-167215
 
Project: FFVIII-Logo.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 132.98x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
 

Filaments Used:

• PLA BambuLab Basic Black Transmission Distance: 0.6
• PLA BambuLab Basic Red Transmission Distance: 4
• PLA BambuLab Basic Yellow Transmission Distance: 6
• PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments
 

Swap Instructions:

• Start with BambuLab Basic Black
• At layer #9 (0.8mm) swap to  BambuLab Basic Red
• At layer #15 (1.28mm) swap to BambuLab Basic Yellow
• At layer #22 (1.84mm) swap to BambuLab Basic Jade White for the rest