The Great Wave Bookmark - 3 Options

Inspired by artistry of The Great Wave off Kanagawa, I will make three separate bookmarks from the same image. I will produce two distinct bookmarks from the same image simply by painting them with different colors. The one called Sunlight(Plate1) will depict a sunset/sunrise with warm hues of reds and yellows as a background. The one of Moonlight(Plate 2) will show a moonlit skyline of cool blues and lighter skies. The third I will cut out the background and call it No Light(Plate 3), emphasizing the dramatic silhouette of the wave and its intricate details against a minimalist background.

Note: Sunlight uses 6 colors and needs Matte Ivory White(low TD White) and Basic Maroon Red (lower TD Red) to achieve the desired effects. Moonlight and No Light uses Basic Ivory White and 4 Colors. To get a whiter wave crest, use Matte White.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Pictures Shown are printed in an 0.2mm Nozzle

Moonlight and No Light

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Basic Turquoise True Transmission Distance: 2.3

PLA BambuLab Basic Jade White Transmission Distance: 5 (use Matte White to get a brighter white)

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer (0.72mm) swap to Blue

At layer (0.96mm) swap to Turquoise True

At layer (1.2mm) swap to Jade White for the rest. (use Matte White to get a brighter white)

Sunlight

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Basic Turquoise Transmission Distance: 1.4

PLA BambuLab Matte Ivory White Transmission Distance: 2.7 (Any Low TD White)

PLA BambuLab Basic Maroon Red Transmission Distance: 1.6 (Any Low TD Red)

PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4

This print uses 6 unique filaments

Swap Instructions:

Start with Black

At layer (0.64mm) swap to Blue

At layer (0.88mm) swap to Turquoise

At layer (1.12mm) swap to Matte Ivory White

At layer (1.36mm) swap to Black

At layer (1.44mm) swap to Maroon Red

At layer (1.68mm) swap to Sunflower Yellow for the rest. 

This is a 6 color print. Note not to put red and yellow in the place of black as black is used twice. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.