attacco dei giganti hueforge

Boost Memetti un boost se ti piace il mio lavoro

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 159.76x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #9d2235 PLA esun red basic  Transmission Distance: 1.6
    #e2dedb PLA sunlu  White  Transmission Distance: 8
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Red
    At layer #15 (1.28mm) swap to Black
    At layer #20 (1.68mm) swap to White for the rest.