Wall Mounted Planter Pot with Drip tray

🎯 Recommended Print Settings
For best results, print this design with a 0.4mm nozzle at 0.24mm layer height for a great balance of speed and detail. Use 8-15% infill for a solid, lightweight print that won’t use too much material.

🪛 Recommended Screw Size for Wall Mount:
For the best fit in the default planter design (as provided in the file), use screws with a diameter of 0.16 inches (4.0 mm) and a length of 1 inch (25 mm). This is the ideal size for fitting into the holes of the planter wall mount. The plug size should be 5 mm in diameter for a secure fit. If you're in the U.S, look for screws that are #6 or #8 gauge with the appropriate length.

Note: You can scale the model to your preferred size, but be sure to choose the correct screws based on the new hole size, as it will change with the scale.

⚡ Speed vs. Quality Trade-off
The model is optimized for a 0.4mm nozzle, but I’ve also had success with a 0.6mm nozzle if you’re looking to speed things up. The larger nozzle won’t affect the strength, and the prints still look awesome