August 6, 2025
Description
“Judge me by my size, do you?”
- Jedi Master Yoda
Dagobah. It isn’t just a swamp, it is a refuge, a training ground, and the birthplace of a new age of legends.. It's where the last Jedi Master trained the galaxy’s last hope, surrounded by mud, mist, and mystery. “Do or do not. There is no try.”
I did my absolute best to try and capture the depth of the swamp through the foreground canopy at the top to colors that would invoke both that vintage style with the greens of the planet's swamps.
This print was made for those of us fans who remember when Star Wars was strange, mythical, and could make us even want to visit the depths of Dagobah.
Hueforge prints can be resized by adjusting only the X and Y scale—leave the Z height unchanged for best results.
Each print is 133.33x200mm
These prints display wonderfully with a 3d printed HueForge stand, such as the middle size shown here (as shown in the print photos):
https://makerworld.com/en/models/153050-3-collapsable-stand-sizes-hueforge-etc?from=search#profileId-167215
Project: DagobahPoster.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
This print uses 4 unique filaments
Swap Instructions:
License:
Standard Digital File License
Serics
