Unbreakable TPU Ball

Boost MeLove my models? Support me by boosting me completely for free!

                                   This model is a quick print that only uses 16 grams of filament and takes 1 hour and 5 minutes! Just a                          couple of things to keep in mind after printing,

 

1. Make sure you don't try to destroy it with a hammer or anything inside. Do it somewhere safe not indoors 
2. Keep in mind it could still melt or burn so please use caution. 
3. This model is very stiff because it is 15 layers thick so you can hit it with a golf club, hockey stick etc, and it will most likely not break.

4. Just remember don't do anything too off the hook if you want to destroy it. other wise, have fun!

    

    

 

  Here are the links for my other toys if you are interested!

              

                                  https://makerworld.com/en/models/1651792-tpu-hockey-puck-only-20-grams

 

 

                                  https://makerworld.com/en/models/1576667-worlds-smallest-working-fidget-spinner-1-gram

 

 

                                  https://makerworld.com/en/models/1494021-vortex-spinner-20-000-rpm-print-by-object

 

 

                                  https://makerworld.com/en/models/1539421-impossible-rings-fidget-toy-print-in-place-no-ams

 

 

 

 

                                                                      https://makerworld.com/en/@Bardownskiiz