LOVE lithophane holder, battery operated LED light

LOVE lithophane base, battery operated that can hold more than one lithophane photo.

The lithophanes can easily slide out of the heart and be switched with another one.

Our designs are protected by the Copyright Law. They are for personal use only!

Makes a great gift for valentine's day.

To assemble you will need:

• 5V LED Strip Light, Cold White - Battery Powered (0.5m) & 3 AA batteries (you can pick the USB powered if you prefer but this is designed to hold the battery case)
• Hot glue / Superglue
• https://lithophanemaker.com/Lithophanes.html to create your heart Lithophanes - settings shared below

Assembling steps:

1.Before gluing the Heart on the Base, take the strip lights and pass it through the slot of the base, into the slot of the heart.

2.Glue the the strip lights around the heart and cut off whatever is left.

3. Now glue the heart to the slot on the base. Use superglue to make sure it stays on the base.

4. Use hot glue to glue the battery case at the bottom like the image below. Make sure to leave enough space for the battery case to open.

5. Tidy and glue the cable in the space left.

6. Glue the small heart on the switch.

Lithophane maker:

1. Go on: https://lithophanemaker.com/Lithophanes.html, upload your photo and use the settings below:

2. Print the heart upside down and only add supports at the bottom like shown below. I added a print profile for the lithophanes, the only thing you'll have to do is open the 3mf file on your slicer, right click on the model, select ‘Replace with STL’, select the lithophane you created, slice and print. - make sure it looks like this:

3. Slide the lithophane in the heart - You can create as many lithophanes you want and switch between them.

And that was it !!!

My designs are protected by Copyright Law. When you download, you do not have the right to sell any digital file or printed model of my designs. To legally sell printed models, you may obtain my permission by signing up to my Patreon through this link:

patreon.com/

Stay connected with me on TikTok and Instagram at @our3dcosmos

Print away!