Magnetic Latch Key Cover

Modern magnetic latch retractable keys that makes handle much bigger and longer. Makes the keys easier to handle and turn. It can accommodate two keys about 2.5mm thick. Sliding mechanism has magnetic latch that makes very satisfying click sound and holds the key in place.

Printing guide:

For the cover - there are two pauses added in slicer for inserting 6x2mm neodymium magnets, simply slide them in the pocket and continue print.

For the keys - there is pause added in slicer to imprint the key within the sliding mechanism. This should fit most of the usual keys. When placing the key in, insert the magnet inside of the key hole that is normally used for keychain. (5-6x2mm diameter magnet fits) Than continue print. It will imprint the key with magnet inside.

Please beware of magnet orientation and also that one key slider is mirrored. Make sure the magnets attracts each other and work as a latch to hold slider in place.

When you insert both keys in the cover, simply glue the back cover with CA glue. Move the keys away and let the glue cure at least 30minutes so it wont glue your slider. After that enjoy your unique and modern keychain <3