Key Organizer with Interchangeable Front Panel

This key organizer with an interchangeable front panel gives your keys a new look and also offers space for a total of four keys.

The front panel is held in place by three neodymium magnets (5x1mm), but can also be glued with superglue or plastic adhesive if magnets are not needed.

To replace the front panel, there is a small hole on the back through which you can easily remove the front panel using the printed key.

For the screw connection, I recommend M4x12mm socket screws, but suitable M3 screws can also be used.

The spacers required between the keys are easily printed in different sizes.

This allows 1, 2, or 3 keys to be placed in the key organizer.

The key organizers were printed with standard PLA.

Here are the links for the magnets and the screws I used.

https://amzn.eu/d/cOhrtCB

https://amzn.eu/d/2xkzZ4T

The appendix also includes assembly instructions and instructions for replacing the front panel.

I hope you enjoy printing ;)