After about a month of work, I'm very proud to announce my V1 of the B-17 Flying Fortress. This is only a V1 so there's plenty of improvement to make. But before you assemble this, please read the rest of this description.
- This is a V1. There's lots of improvements to be made so please be aware that you will most likely run into a few while assembling this. When you do, please DM me and tell me what I can improve or fix.
- This is more of a conventional model kit. There's not a whole lot of snap-fitting or click-together pieces. YOU have to align the pieces together and glue them into place. This model has almost 20 plates and takes a long time to build. This is for patient model builders, and someone who has a lot of glue :)
- Read the instructions carefully. Unless the instructions say specifically to glue a piece, DO NOT glue it. Again, if the instructions could use improvement, DM me or say something in the comments. I want to hear your feedback!
- Some pieces need tweezers, pliers, or wire cutters to assemble. Other than glue that's all you need. And patience. And time. . . and a few different filament colors. . . and a printer. . .
- If you are pleased with the model once you're finished with it please leave a review or even a like. Both are very appreciated.
- Don't get frustrated, and take your time!
Boost MeThis is took me an incredible amount of work, designing, failing, and printing again. It would mean the world to me if you could show your appreciation by giving a boost. The picture of the box of printing waste is not even HALF of the waste I accumulated testing and printing this model. Thank you so much if you boosted!
Again, if you have any comments, complaints, or suggestions, PLEASE reach out to me =. I'll get back to you as soon as possible. Thank you for all your support. Have fun!
🎇3𝓓 𝓟𝓻𝓲𝓷𝓽 𝓦𝓲𝔃𝓪𝓻𝓭🎇
