Dual Shade Pendant Lamp

Dual Shade Pendant Lamp

18cm x 18cm x 21,4cm (DxWxH)

Choose your colors and go nuts!

Designed for a threaded E14 socket. Like this: 

Both shades are printed in vase-mode at 0.28mm height and 0.8mm width, which is fully possible with the standard 0.4 nozzle.

I do recomend you use a fully translucent filament for the outer shade for best visuals.

For my frosted shades i used my own profile which i will include in the printprofile. I have tried it with 3 brands of clear translucent filament. However, do keep an eye on your print when trying it out, it prints “fast”, cool and with maxed out parts-fan. IT IS NOT A PRESS PRINT AND LET GO PROFILE!!

The E14 socket-holder prints normaly with standard settings.

Assembly

When the two shades have printed, just push the smaller one inside the bigger one ;) It will be a tight fit but you should manage without too much force. The outher shade has a small "lip" the edge of the inner shade will rest on. Once in place you wil not get it out so make sure it´s the colors you want.

To hang the lamp, just feed the socket through the top (the threaded retaining-collars are not needed) and screw directly in to the socket holder then just hang the shade. It should be self-centering.

The lamps i used were all around 2W and 110 lumen.

There is TWO print-profiles (one with shades, one with the socket-holder) You need to print the both for a complete lamp

Good luck! and ALWAYS USE LED LIGHTS! 

Happy Printing! :)