Gyomei Himejima Chain Fidget

Description

I am so excited for the Demon Slayer Infinity Castle movie!

I am making a bunch of Demon Slayer inspired fidget toys. This fidget chain is inspired by Gyomei Himejima's weapon. 

 

It prints in place and works really well straight from the buildplate. No additional hardware needed.

I made two sizes: A medium which is approximately 40cm in length and a longer version which is approximately 60cm in length. 
(I could try and make an even longer version if there is a demand for it.)

 

EDIT: I have added a print profile for the A1 MINI. Scaled down to 95% the slicer says it will fit on an A1 mini. I do not have a MINI, but I tested the scaled down print on my A1 and it prints perfectly.

 

PRINT INSTRUCTIONS:

This is not an easy print! Make sure your buildplate is super clean! The print will fail if the builplate is not properly clean. 
I will add print profiles with brim-ears on the chain links, in case you are having trouble. 

 

Check out my other Demon Slayer prints.

I am working on a Rengoku inspired fidget toy with embedded magnets next.

Boost MeClick here to give me a boost. It is the easiest way to support my work. And it's free! It really means a lot if you do!
Thank you!

You can also support my work on Ko-fi!