Circle Medal Hangers

Circle Medal Hangers Wall Mounted

Size 140mm x 140mm x 25mm

These medal hangers include a small block inside at the bottom to help hold heavier medals vertical.

I have also added 2 options for the size of the inner circle piece. Loose or Snug.

Loose Fit (Lighter Medals)

This is the smaller inner circle that leaves a small gap around the outside. Generally good for lighter medals.

Snug Fit (Both Heavy and Light Medals)

For this version I have increased the size of the inner circle as big as possible to create a snug fit leaving no gap around the outside. This is better suited for heavier medals.

I've made it a little deeper than the wooden conqueror medal hangers to make it easier to fit all the ribbon inside.

Circle Magnets required are 10mm X 2mm. Just simply glued in.

The back is completely flat which is perfect to be mounted on the wall with command strips. I personally use the command medium picture hanging strips. They're kind of like plastic Velcro. Helps when removing from the wall.

Different Shapes Below.

You can find my Square Medal Holders here;

Square Medal Holders by 3DPrintingCF MakerWorld: Download Free 3D Models

You can find my Original Size Hexagon/Honeycomb Medal Holders Here;

Honeycomb Medal Hanger (Improved) by 3DPrintingCF MakerWorld: Download Free 3D Models

You can find my Smaller Hexagon/Honeycomb Medal Holders Here;

Honeycomb NANO Medal Holder by 3DPrintingCF MakerWorld: Download Free 3D Models